- Order in dependency order: booth dimensions first, large-format graphics second, small collateral last.
- Large-format pieces need the longest lead time and the strictest file specs, so they start the clock at eight to ten weeks out.
- Ship to the advance warehouse or directly to the hall only if the show rules and the deadline allow it. Otherwise ship to yourself.
- Build in a two business day buffer on everything. Shows do not move their opening day.
- Bring a small emergency kit of stickers, tape, and backup cards so one late box does not sink the booth.
Start with the booth, not the artwork
Every print decision at a trade show flows from the space you rented. Before anyone opens a design file, collect four facts from the exhibitor manual: the booth size, the booth type, the height limits, and the rules about hanging or flooring. A ten by ten inline booth, a ten by twenty, a corner, and an island each have different sight lines, and each one changes which graphics matter.
The booth type tells you where people will actually look. In an inline booth, visitors see the back wall and the front of the table. In a corner, they see two sides. In an island, every side is a front. Height limits matter because many shows cap inline booths at eight feet for the back wall and four feet for the side rails, and a banner stand that is an inch too tall can be refused at the door.
Next, read the show rules on materials. Many halls require flame retardant fabrics for anything hung overhead or used as a wall. Some forbid adhesive on the carpet. Some restrict balloons, helium, or floor stickers. Finding that out in the exhibitor manual costs nothing. Finding it out on move-in day costs a reprint.
Write the specifications on one page: booth number, dimensions, wall height, whether you have power, the floor surface, the show dates, the move-in window, and the advance warehouse deadline. Everything below refers back to that page. If your team is also ordering from a trade printer, send that page with the first request so the quote reflects real constraints. Our guide to choosing a trade printer covers what to ask a production partner before you commit.
The full print inventory
Most booths need some version of the same list. Walking through it deliberately beats remembering it at the last minute.
| Piece | Job it does | Typical production lead | Order position |
|---|---|---|---|
| Backdrop or back wall graphic | Tells people who you are from thirty feet | Longest. Allow two to three weeks plus shipping | First |
| Retractable banner stands | Flank the booth, carry a single message | Moderate. Often several days of production | Second |
| Table throw or counter wrap | Covers the table, adds a branded surface at eye level | Moderate to long. Dye sublimation takes time | Second |
| Floor graphics or mats | Pulls people in, marks the threshold | Moderate. Check hall rules first | Second |
| Hanging sign | Visible across the hall | Long, plus rigging costs from the show | First |
| Rigid signs and foam board | Pricing, product callouts, QR codes | Short to moderate | Third |
| Brochures, flyers, one sheets | What people take home | Short. A few business days | Fourth |
| Business cards | Contact after the show | Short | Fourth |
| Stickers, giveaways, swag | Reasons to stop and remember you | Moderate. Promo imprint adds time | Third |
| Staff apparel | Makes your team findable | Moderate. Sizing delays are the usual culprit | Third |
The order position column is the point of the table. Not every item starts at the same time because not every item has the same risk. A flyer that arrives two days late is annoying. A back wall that arrives two days late means your booth is a table and some air.
The calendar, working backward from move-in
Pick the date the booth opens, then back up. These windows assume a domestic show and a normal production schedule. Cut nothing from them unless you have already done this exact show before.
- Ten to twelve weeks out: confirm booth size and type, read the exhibitor manual, decide the message hierarchy, and request quotes for large-format pieces.
- Eight to ten weeks out: finalize large-format artwork, approve proofs, and place the order for the back wall, hanging sign, and banners.
- Six weeks out: place the order for table throws, floor graphics, and any custom fabric. Fabric dye sublimation has a longer queue than most people expect.
- Four to five weeks out: order promotional items and staff apparel. Collect sizes by now. Late sizing is the number one cause of apparel delays.
- Three weeks out: order brochures, one sheets, and business cards, and confirm that the large-format pieces are shipped or on schedule.
- Two weeks out: confirm delivery to the advance warehouse or your office, check tracking, and print the packing list.
- One week out: pack, label, and photograph everything. Ship the booth kit by the deadline or hand carry the fragile pieces.
Production partners publish typical timelines by product, and it is worth reading them before you plan. Our breakdown of promo product timelines from quote to delivery shows where the days actually go on an imprinted order, and the same logic applies to anything printed on a substrate or fabric.
The most common calendar mistake is treating production days as total days. A stated production time of five business days does not include artwork review, proof approval, payment clearing, or freight. Add those, and a five day product is a three week project.
Large-format first: the pieces that cost you the most when they are late
Start with the back wall. It is the single most visible piece in the booth, it has the longest production time, and it needs exact dimensions. Measure from the exhibitor manual, not from memory. Ask whether the wall is a tension fabric frame, a pop up with magnetic panels, a straight panel system, or a plain backdrop that hangs from a pipe and drape. Each has different artwork specs, bleed requirements, and hardware. The graphic is useless without the frame that matches it.
When you send artwork, include the frame model or the exact finished size, ask for a template, and place critical content inside the safe area. Faces, logos, and QR codes belong in the center band of the wall, roughly between four and six feet from the floor, because that is where eyes land. The bottom two feet get hidden behind tables and bags, and the top foot gets lost in lighting glare.
Retractable banner stands come next. A standard stand is usually thirty three or thirty six inches wide and about eighty inches tall, but check the actual hardware. The bottom six inches or so of the print disappears into the base, so keep text and logos above that line. Retractable banners work best with one idea. A banner with a headline, two sentences, and a URL is a better banner than one with a paragraph.
Fabric table throws and counter wraps are printed by dye sublimation, which means the color is infused into the fabric rather than sitting on top. They look excellent and travel well, but fabric is sensitive to color shifts, so request a proof when brand color matters, and plan for a small delta between screen and print. Our primer on imprint methods explains why different processes behave differently on different surfaces.
Hanging signs and any overhead rigging are controlled by the show. Ordering the sign is half the job. Ordering the rigging, the lift, and the electrician or rigger from the show organizer by their discount deadline is the other half. Missing the discount deadline often doubles those fees.
File prep that prevents a reprint
Large-format printing is forgiving about resolution and unforgiving about dimensions. A sharp print at six feet does not need the same pixel density as a business card, because nobody stands six inches from a back wall. Most large-format work is produced at a fraction of the resolution of small print, which is why a good vector logo matters more than a huge raster file.
Before you send artwork, work through this list.
- Build the file at actual finished size or at an exact proportional scale, and say which.
- Add the bleed the printer specifies, and keep critical content inside the safe area.
- Outline or embed fonts so a missing typeface does not substitute silently.
- Use vector for logos and text. Embed or link photographs at a sensible resolution for the viewing distance.
- Use the color mode the printer asks for, and pass brand colors as swatch values, not as screenshots.
- Check dark and light areas. Fabric and vinyl behave differently with large flat areas of solid color.
- Add a proof request for any piece where a color match matters.
If your team does not have in-house design help, start from a template. The template library is a fast way to get properly sized artwork that already respects bleed and safe areas for common print products.
Small collateral: the pieces that feel easy and still trip people up
Brochures, flyers, and one sheets look simple. They fail for dull reasons. The quantity is wrong, the stock is too thin to survive a humid show floor, or the file goes to print with a typo in the phone number.
Quantity first. A reasonable starting point is to plan collateral for forty percent of expected booth conversations, then add a buffer. If you expect to speak with three hundred people, print for roughly a hundred and fifty and keep the digital version ready for the rest. Printing for every attendee is how boxes of brochures end up in the office closet for two years.
Stock matters more than people think. A thin gloss sheet curls in the heat of a convention hall and marks easily. A heavier uncoated or matte stock reads as more considered and takes a pen note, which is useful when a salesperson writes the visitor's name on the back. Cards should be on a stock that feels like you meant it. When you order in volume, check the minimums and setup fees that apply, because a slightly larger run often costs very little more per piece and prevents a mid-show stock out.
Add a trackable element to every piece. A distinct QR code or short URL per show tells you afterward which events earned their cost. If you only have one printed piece in your booth with a tracking code, make it the take home sheet.
Finally, proof the contact details out loud. Read the phone number, email, and URL to another person while they follow along on the file. Typos in contact details are the most expensive errors in print because they are invisible until the box arrives.
Shipping, receiving, and the advance warehouse decision
Every show gives you two options for freight. You can ship to the advance warehouse, which stores the boxes and delivers them to your booth on a set date, or you can ship directly to the exhibit hall during a narrow window. A third option, often best for small kits, is to ship to your own office or hotel and carry the boxes in.
Advance warehouse shipping is cheaper per pound but has a hard deadline. Miss it and you pay a late surcharge or are routed to direct-to-show delivery, which costs more. Direct-to-show delivery is the only choice when something must arrive after the warehouse closes. Both involve drayage fees that the show organizer charges per hundred pounds, with minimums. Read the drayage section early, because it can change whether a heavy rigid sign is worth bringing.
Give every box a label with the booth number, the exhibitor name, the show name, and a count such as one of four. Pack a document inside the first box that lists every item. Photograph the packed boxes and the open contents. If something goes missing, you will want evidence.
Ask your print partner whether they can split shipments. A common arrangement is for the large-format pieces to ship to the advance warehouse while the small collateral ships separately to your hotel. That way a late brochure box does not hold up the back wall.
Track every parcel and keep screenshots of the tracking numbers in one shared note. When a box is late, the first twenty minutes decide whether you can reroute it.
What to pack for a late box or a damaged piece
Even a well-run order can lose a piece. A scratch on a rigid sign, a torn corner on a banner, a box that sits on a loading dock one day too long. A small emergency kit keeps one problem from becoming a booth problem.
Pack backup business cards, a stack of simple branded stickers, double sided tape, gaffer tape, zip ties, a utility knife, a tape measure, a small roll of clear packing tape, a few binder clips, and a Sharpie. If you have a QR code that leads to a landing page, print it on a few sheets as a fallback.
Consider a simple second tier of signage. A table sign printed on rigid board or a small foam board stand with your name, one line, and a QR code costs little and fits in a bag. If the big graphic fails, it still tells people who you are.
Ask your print partner about reprint turnaround before you leave, and keep a contact who can answer after hours. A local reprint is sometimes possible for small items. Large-format reprints rarely are, which is why the early order matters so much.
Budgeting for the print side of a booth
Print is usually a fraction of the true cost of exhibiting. Booth space, travel, labor, drayage, electrical, and lead retrieval often dwarf it. That is a reason to avoid cutting print costs in ways that hurt your result. A weak back wall wastes the larger investment around it.
A practical way to budget is to group print into three tiers. The anchor tier is the back wall, banners, and signage that define the booth. The support tier is table coverings, floor graphics, and rigid signs. The consumable tier is brochures, cards, stickers, and swag. Spend most of your care on the anchor tier, because it lasts across shows, and spend most of your quantity decisions on the consumable tier, because it is the part you will run out of.
Reusable items deserve a second look. A well-built retractable banner or tension fabric graphic can serve at five or six shows. Spread its cost across all of them. Design it with that in mind, which means avoiding dates and show-specific offers on anything meant to last. Put show-specific messages on a smaller, cheaper piece that you replace each time.
Ask for quotes at several quantities. Per piece cost usually falls with volume, and on small collateral the difference between a hundred and two hundred and fifty is often modest. Our Trade Print tiers show how published pricing steps down as volume rises, which is useful if a team exhibits regularly.
After the show: reuse, recycle, and follow up
The print job is not done when the booth closes. Take a photograph of the booth at full strength before the first day starts, because that photo will guide next year's design. After the show, note what worked: which piece drew people in, which handout ran out, which one barely moved.
Clean and store reusable graphics carefully. Roll fabric banners or fold them along manufacturer guidelines, and keep rigid signs flat in a protective sleeve. Retractable banner prints should be retracted slowly and transported in their case.
Use the leftover collateral. Brochures can ride along with sales kits, and unused cards can go in the next mailing. If your artwork is date specific, you may still be able to cover the date with a simple sticker rather than reprinting.
Finally, review lead sources by QR code or URL. If one show produced forty percent of your leads from ten percent of the spend, that is the data you want when the next registration deadline arrives.
The seven mistakes that cost the most
- Starting with the artwork instead of the booth specifications, and discovering the wall is the wrong size.
- Treating production days as total days and forgetting proofing, payment, and freight.
- Ordering collateral before large-format pieces, so the cheap items are on time and the important ones are not.
- Ignoring the show's flame retardant, floor, or hanging rules until move-in.
- Skipping a proof on a color-critical piece and finding out the brand color shifted when the crate opens.
- Placing key content in the bottom two feet of a wall or banner where tables and bags hide it.
- Shipping everything in one box, so a single delay stops the whole kit.
None of these is exotic. Each one is preventable with a calendar and a checklist, which is why we have laid them out in order.
Working with a trade print partner on an event order
If you buy booth print regularly, whether for yourself or for clients, a trade account makes the process calmer. A wholesale partner can quote multiple pieces on one order, keep your artwork on file, and ship to multiple addresses. That matters for exhibitors who send the large kit to the show and the cards to the hotel.
Ask for these things before placing the order. First, a written production time for each product, separate from shipping. Second, a proofing process that lets you review artwork before it prints. Third, a clear policy on reprints when the error is the printer's. Fourth, the ability to split shipments. Fifth, a named contact for event deadlines.
If you resell print to exhibitors, the same list applies, and it is worth reading how to choose a trade printer before you commit your clients' deadlines to someone. The cost of a bad partner on a trade show job is a booth that opens without its graphics, and that is a client you do not get back.
Inkgility's Trade Print program covers signage and large format alongside cards, flyers, stickers, and promo products, so one account can cover the whole booth. If you have a deadline that sits close to the show date, use the contact page and tell us the date up front. A realistic answer on day one is better than an optimistic one on day ten.
Frequently asked
How far ahead should I order trade show booth graphics?
Plan to place large-format orders eight to ten weeks before move-in. That window covers artwork finalization, proofing, production, freight, and a buffer. Smaller printed pieces like brochures and cards can be ordered three to four weeks out, but only after the large-format pieces are secured.
What is the most commonly forgotten booth print item?
Floor and threshold details, table coverings, and a backup set of business cards. Teams focus on the back wall and banners and forget the pieces that make the booth feel finished. A small emergency kit of stickers, tape, and spare cards also solves most late-box problems.
Should I ship to the advance warehouse or the show floor?
Use the advance warehouse when your pieces will arrive before its deadline, since it is usually cheaper. Use direct-to-show delivery for items that cannot make the deadline. For small kits, shipping to your office or hotel and carrying the boxes in is often simplest.
How do I make sure my artwork prints at the right size?
Get the exact finished size or the frame model from your hardware supplier, ask for a template, build the file at that size with the requested bleed, and keep critical content inside the safe area. Request a proof for any color-critical piece.
Can I reuse booth graphics at multiple shows?
Yes, if you design for it. Avoid dates and show-specific offers on anchor graphics such as the back wall and retractable banners. Put time-limited messages on smaller, cheaper pieces you replace for each event, and store reusable graphics carefully between shows.
Plan the whole booth in one account
Signage, large format, cards, flyers, and promo items can all sit on one trade account with tiered pricing.
Explore Trade Print