The quick read
  • Minimums and setup fees pay for fixed work that costs about the same on a small job as on a large one, which is why small orders carry a higher cost per piece.
  • A promo price is a setup charge, a per piece product cost, and a per piece decoration cost, and each one moves differently with quantity.
  • Setup is often negotiable on repeat artwork, larger quantities, and bundled orders. Production costs and the minimum itself usually are not.
  • Moving up one price break can lower the total cost, so always ask what the next tier costs.
  • Show setup and run charges separately and clients will accept them.

Why minimums and setup fees exist

Picture a decoration shop with a single press. Printing a job requires the same sequence of steps regardless of size. Someone receives and checks the artwork. Someone builds a proof. Screens get burned or a plate gets engraved or a stitch file gets digitized. The press is loaded, adjusted until the colors register, and tested. The blanks are unpacked, decorated, inspected, counted, and boxed. Only the middle of that sequence, the actual printing, scales with the number of pieces. The rest takes roughly the same time for fifty pieces as for five thousand.

That fixed work is what the setup fee and the minimum order quantity are built to recover. If a supplier accepted every order at a single flat price per piece, small jobs would lose money and large ones would subsidize them, and the supplier would have to raise prices for everyone or turn away small work. Minimums and setup fees are the honest alternative. They say: this is the fixed cost of the job, and this is the smallest run at which the job is worth running.

Product minimums have a second source, which is the factory. Many promotional items are made by the thousand. A supplier who buys a pallet of tumblers breaks the pallet down and sells it in smaller lots, but custom manufactured goods, such as a custom shaped item or a custom woven lanyard, have minimums set by an overseas factory that will not start a mold for fifty pieces. The distributor's minimum is a reflection of that upstream reality.

Understanding this changes how you handle the objection. A client who hears "that is just our policy" bristles. A client who hears "the setup work costs the same for fifty as for five hundred, so spreading it over more pieces lowers your cost per piece" understands the reasoning and often decides to order more.

The anatomy of a promo price

Before you can negotiate anything, you need to read a quote as a set of separate parts. Most promotional product prices include three of them, and some include more.

The first is the product cost, which is the price of the blank item, such as a tote bag or a tumbler. It is quoted per piece and it falls with quantity, as the supplier buys in volume. The second is the decoration cost, per piece, which covers ink, thread, laser time, or labor. It also falls with quantity, though usually less steeply. The third is the setup fee, a flat one time charge. It does not change with quantity, which is why its weight in the total shrinks as the run grows.

Additional charges can appear: a proofing or art fee, a freight charge, a less than minimum fee, a color change charge, a second imprint location, and a rush fee. A quote that bundles everything into a single per piece number hides these details. That is convenient for a client who wants simplicity, and risky for a distributor who needs to know where the money is.

Writing a quote as three lines, product, decoration, and setup, with the others itemized below, lets you see exactly what moves when the quantity changes. It also lets you see what a competing quote includes and leaves out, which is the only fair way to compare. Our guide to reseller margin math walks through building that ledger and adding your own margin on top.

How price breaks work

A price break is a quantity threshold at which the per piece price drops. Promotional products are quoted at breaks such as twenty five, fifty, one hundred, two hundred fifty, five hundred, one thousand, and five thousand. The first break is the minimum. Each higher break lowers the price, because the supplier's fixed costs spread further and its purchasing and production become more efficient.

The drop is not linear. It is steepest at the start and flattens out at higher quantities, since the fixed cost is already mostly absorbed. Consider a stainless steel tumbler with a laser engraved logo. At one hundred pieces the combined product and decoration cost might be twelve dollars each. At two hundred fifty it might be ten dollars and fifty cents. At five hundred, nine dollars and fifty cents. At one thousand, nine dollars. The jump from one hundred to two hundred fifty saves a dollar and fifty cents per piece, while the jump from five hundred to one thousand saves fifty cents.

This shape produces a useful rule. The most valuable question on any quote is "what does the next break cost." Here is why. Using the numbers above, one hundred tumblers at twelve dollars is twelve hundred dollars. Two hundred fifty at ten fifty is twenty six hundred twenty five dollars. The client pays about fourteen hundred more for one hundred fifty extra pieces, or about nine dollars thirty each for the extras, noticeably less than twelve. The takeaway is that the extra pieces are cheap. A client who needs one hundred eighty and is quoted at the one hundred break pays twelve dollars each, or twenty one hundred sixty dollars, while two hundred fifty at ten fifty costs twenty six hundred twenty five. Rounding up costs more in that case, but at one hundred ninety five pieces the gap is small enough that the extra stock is nearly free, and you will not know where the crossover sits unless you ask for both quotes.

Break points are also where suppliers apply their own rounding. A client who asks for two hundred forty pieces may get quoted at the one hundred break, while a quote for two hundred fifty drops the price on the entire order. A ten piece difference can reduce the total. Always ask your supplier to quote the next break when the requested quantity sits just below it.

Setup fees by method

Setup fees differ by how a logo is applied, because the fixed work differs. A few typical ranges give a sense of scale. These are industry orders of magnitude, and your supplier's numbers will vary.

MethodWhat the setup pays forTypical range
Screen printA screen per color, registration on the press$25 to $60 per color
Pad printAn engraved plate per color and a product fixture$40 to $75 per color
EmbroideryDigitizing the logo into a stitch file$40 to $100, once
Laser engravingArtwork preparation and fixture positioning$0 to $50
Full color digitalFile check and proof$0 to $40
Custom manufactured goodsMold, die, or custom tooling$150 to $1,500 or more

Two things stand out. Methods without physical tooling, laser and digital, have the lowest setup, which is why they dominate short runs. Methods with tooling charge for each color or component, which is why a four color logo costs far more to set up than a one color logo. If you want the method by method detail, see our guide to imprint methods.

Custom tooling deserves special mention. A custom shaped keychain, a molded stress toy in the form of the client's mascot, or a custom die for a debossed leather item needs a mold or die made before the first piece exists. That cost can run from a few hundred dollars to well over a thousand, and it is a one time charge that stays with the supplier or factory. Reorders of the same item skip it. If the client expects to reorder, that is worth saying: the tooling is an investment that pays back over several runs.

What is negotiable

Suppliers will not discount everything, but several charges have real flexibility, particularly for distributors with an account and a regular volume of business.

Setup fees on repeat orders are the clearest case. Once a screen, plate, or stitch file exists, there is no reason to make a new one. Most suppliers keep these assets for a period, often twelve months or longer, and waive or sharply reduce the setup on a reorder with identical artwork. Ask what their reorder policy is, and make a note of the expiration. A reorder placed the week after the window closes can bring back the full setup charge.

Setup fees on larger orders are the second. Many suppliers waive setup at a certain quantity or dollar threshold, since the fixed cost is trivial against the order. If a client is near that threshold, bumping the quantity slightly may remove the fee entirely.

Bundled orders are the third. A client who orders a pen, a tote, and a notebook with the same logo is three jobs, but the artwork preparation overlaps. Some suppliers will discount art or proofing charges when the same logo goes on several products in a single order. Mention the bundle at the quote stage, not after.

Less than minimum charges are the fourth. If a client wants forty pieces of an item with a fifty piece minimum, a supplier will often accept the order for a flat fee instead of requiring the full fifty. That fee is frequently less than the cost of ten extra pieces, and it spares the client from buying product they do not need.

Promotions and relationships are the fifth. Suppliers run periodic offers that waive setup, discount a product category, or offer free shipping above a threshold. Distributors with an established account hear about these, and they can sometimes request similar terms for a specific order. Trade programs with published terms, such as the Inkgility trade tiers, are built so that these benefits are not a matter of who you know but of published volume and standing.

When you ask, ask specifically. "Can you do anything on the setup?" invites a shrug. "This is a reorder of the March order with the same logo, can the setup be waived?" invites a yes or a clear reason for no.

What is not negotiable

Some charges are not worth pushing on, and knowing which ones saves goodwill.

Third party costs are firm. If a supplier has to pay a factory for a mold or an overseas production minimum, they cannot reduce what they pay. The same applies to embroidery digitizing sent to an outside digitizer, which the supplier has already paid for. Appeals on those charges rarely work.

Hard factory minimums are firm. A custom woven lanyard that the factory will not make below five hundred pieces cannot be sold in a run of one hundred, no matter how much a distributor wishes it could. The choice is to order more or pick a different product, such as a stock lanyard with a printed imprint, which has a far lower minimum.

Rush surcharges, once agreed, are firm, because they pay for a real disruption to the production queue. And per piece product costs themselves are generally set by the price break. A request for a lower price at a smaller quantity is a request to ignore the supplier's costs, and it will be declined.

The practical line is simple. Fixed costs that the supplier has already absorbed, such as an existing screen or stitch file, are negotiable. Costs the supplier is paying to someone else, or the physical limits of a factory, are not.

Ordering below the minimum

A client with a small budget or a small team may ask for fewer pieces than the stated minimum. A few routes are worth trying before you say no.

Ask for a less than minimum quote, as above. Many suppliers keep a standard flat charge for this, and it is often reasonable. Check whether the product itself is in stock as a blank at that quantity, since a decoration minimum differs from a blank minimum.

Switch the method. A one hundred piece minimum on screen printed totes might disappear with a digitally printed or heat transferred version, which has a low or no minimum. Laser engraving is another low minimum option for metal and wood. The look differs, and the unit price is usually higher, but the total can be far lower on a tiny run.

Switch the product. Stock items with an imprint have lower minimums than custom manufactured ones. If a client wants twenty five of a custom molded item, there is no route. If a stock item in a similar category carries a twenty five piece minimum, the order works.

Consolidate. A client with several small needs, such as welcome kits for new hires, event giveaways, and thank you gifts, can sometimes combine the same item into one order at a better break and use the pieces over several months. This makes sense only if the item will not expire, change with the brand, or take up costly storage.

Be honest about the tradeoff. Spending four hundred dollars on a hundred pieces to get a good price when only forty are needed can be a poor deal compared with a higher per piece price on forty. Run the total, and show the client the two numbers.

The other fees on a quote

Setup and minimums get the attention, yet other line items can move a quote by ten to twenty percent. Read for these.

Art and proof fees cover rebuilding a low resolution logo into vector art, often twenty five to seventy five dollars, or creating a custom mockup. The fix is a clean file at the start. Color change fees apply when a run uses more than one product color, such as a tote in navy and red, and the supplier has to clean the press and reload. Expect a small charge per extra color. Second imprint locations add setup and run for each additional position. Packaging fees apply to individual polybagging, gift boxes, or kitting, and they scale with quantity. Freight is quoted separately in many cases, and it can be significant on heavy items such as drinkware. Finally, taxes depend on the buyer's status. If you are reselling, you may be able to buy tax free with a resale certificate, as covered in our guide to resale certificates and sales tax.

A quote should list each of these items, or state that they are included. If a supplier does not itemize, ask for a written breakdown before you pass a price to a client. A line that appears after approval is hard to recover from.

A worked comparison

An example shows how these pieces interact. A client wants branded canvas totes with a two color logo, and they are not sure how many. The supplier's pricing, stated as illustrative numbers, runs like this. The blank tote costs three dollars at one hundred pieces, two dollars and fifty cents at three hundred, and two dollars and ten cents at five hundred. Decoration for two colors costs one dollar and forty cents per piece at one hundred, ninety five cents at three hundred, and eighty five cents at five hundred. Setup is fifty dollars per color, so one hundred dollars total.

At one hundred pieces: product three hundred, decoration one hundred forty, setup one hundred, total five hundred forty dollars, or five dollars forty per piece. At three hundred pieces: product seven hundred fifty, decoration two hundred eighty five, setup one hundred, total eleven hundred thirty five dollars, or three dollars seventy eight per piece. At five hundred: product one thousand fifty, decoration four hundred twenty five, setup one hundred, total fifteen hundred seventy five dollars, or three dollars fifteen per piece.

Three hundred bags cost about twice what one hundred cost, for three times the bags. The client who needs one hundred bags this quarter and would use another two hundred next year might find the larger order cheaper overall, even after paying for storage. The client who truly needs one hundred and will change the logo next year should stay at one hundred. Neither answer is correct for everyone, and you cannot give the right one without showing the numbers.

Now suppose the same client returns eight months later and wants two hundred more of the same bag. If the supplier's reorder window covers the artwork, setup drops to zero. At two hundred pieces the total is about seven hundred seventy dollars, and the setup waiver saved one hundred. If the client had waited fourteen months and the supplier had discarded the screens, setup would apply again. That small fact is worth passing on when a client asks how often to reorder.

Explaining it to clients

Clients who dislike minimums and setup fees mostly dislike surprises. A few habits take the sting out.

Show the quote in parts. A client who sees product, decoration, and setup separately can see that the setup is a single charge and not a hidden markup on every piece. They also see what happens when they raise the quantity. A two line comparison, "one hundred at five forty each, or three hundred at three seventy eight each," often ends the conversation in favor of the larger quantity.

Explain the reason once, in a sentence. "Setting up the printing screens costs the same for fifty as for five hundred, so the fee is flat." Do not apologize for it, and do not give a long lecture.

Tell them what is reusable. Setup that creates an asset, such as a screen or a stitch file, has future value. "You pay this once, and reorders within a year skip it" turns a cost into an investment.

Offer options. A quote with a good, better, best structure, each at a different quantity or method, lets the client choose a budget. The practice carries over from other categories, and our guide to passing finish costs through to clients describes the same three option approach for print.

Be honest when a request cannot be met. If the factory minimum is five hundred and the client needs one hundred, say so and offer a substitute. Clients remember the distributor who solved their problem with a different product, and they forget the one who said no.

For distributors who buy regularly, a supplier relationship built around published terms makes all of this simpler. When setup policies, reorder windows, and price breaks are written down and consistent, you can quote with confidence and explain them without having to check each time. That is the idea behind the Inkgility Trade Print program, and it is a reasonable standard to ask of any supplier.

Frequently asked

Why do promotional product suppliers have minimum order quantities?

Because each job carries fixed work that costs about the same whether it covers fifty pieces or five thousand: preparing artwork, making screens or plates, loading the press, and packing the order. A minimum keeps small jobs from losing money, and it is usually set where the fixed work stops dominating the cost.

Are setup fees ever waived?

Yes, in several common situations: repeat orders using the same artwork, larger quantities, orders that bundle several products, and promotional periods. Some suppliers keep a reorder window, often a year or more, during which screens, plates, and stitch files are reused at no charge.

What is the difference between a setup fee and a run charge?

A setup fee is a one time cost to prepare the job, such as screens, plates, or a stitch file. A run charge is the cost per piece to decorate, and it generally falls as quantity rises. Compare quotes on the setup plus the run charge at your actual quantity.

Can I order below the stated minimum?

Often, at a premium. Many suppliers will accept a smaller quantity with a less than minimum charge that makes the job worth running, or at the lowest price break with a flat surcharge. Ask before you assume it is impossible, and compare against a different product or method with a lower minimum.

How should I show these charges to a client?

Show setup as its own line and the per piece price separately, with a note on how the price changes at the next quantity break. Clients accept fixed charges when they can see them and understand why they exist. Hidden or blended charges invite suspicion when the quote is compared to another.

See published terms before you quote

Tiered trade pricing, published fees, and clear reorder terms. Find out what the trade program includes.

Explore the Trade Print program