The quick read
  • The product material usually picks the method: fabric takes screen print, embroidery, direct to garment or sublimation, while curved hard goods take pad print, UV or laser.
  • Tooled methods (screen, pad, embroidery) have a setup cost and get cheaper per piece as quantity grows. Digital, UV and laser carry little setup and suit small runs.
  • Full color, gradients and photos point to digital, UV, sublimation or direct to garment. Laser gives one tone only.
  • Send vector artwork with outlined fonts and named colors, and confirm the imprint area before you quote.
  • Compare methods on total job cost at your real quantity, and test a sample for durability.

Why the imprint method decides price, look, lead time and durability

Most distributors pick the product first and treat decoration as a finishing touch. The client wants a tote bag, you find a tote bag, and the logo "goes on it." That works right up until you meet a product that only accepts one method, or a logo that only suits one, and the order stalls at the proof stage.

The method is not a detail. It sets the setup fee, the minimum quantity, the number of colors you can use, the size of the imprint area, how long the logo survives, and how many days the factory needs. Two quotes for the same mug can differ by a wide margin purely because one assumes a screen and the other assumes a transfer. If you learn the methods well, you can look at a logo and a product and say within a minute which approach fits and roughly what it will cost. That speed is what makes a quote feel confident instead of guessed.

Here is the plain version of how each lever moves with the method.

Price. Every method has a fixed part and a variable part. Screens, plates and digitized stitch files are fixed costs you pay once per design. Ink, thread, machine time and handling are variable costs you pay per piece. Methods with big fixed costs and small variable costs (screen printing, pad printing) reward large runs. Methods with small fixed costs and larger variable costs (digital, laser) reward small ones.

Look. Ink sitting on the surface, thread standing proud of fabric, dye living inside a polymer coating and metal removed by a beam all read differently to the eye and the thumb. Clients notice the difference even when they cannot name it.

Lead time. A method that needs tooling needs days to make the tooling. A method that goes straight from file to machine can start sooner, though a queue at the shop matters as much as the process.

Durability. Dishwashers, washing machines, car keys, sunscreen and sanitizer all attack decoration in different ways. Some methods are part of the product. Others are a coating on top of it.

Throughout this guide, any dollar figure is a general, illustrative range meant to help you reason about a job. Real prices vary by supplier, product, quantity and season, so treat them as orders of magnitude and confirm with an actual quote. Nothing here is a published Inkgility price. For the money side in more detail, the guide to minimums and setup fees in promotional products goes further, and the piece on promo product timelines from quote to delivery covers the calendar.

ImprintmethodSetup feeLook and feelLead timeDurabilityMinimums
The imprint method sits at the center of five things a quote depends on.

The vocabulary you need first

A few terms come up in every conversation with a decorator. A substrate is the thing being decorated: the shirt, the pen barrel, the tumbler. Imprint area is the maximum space on the substrate where a mark can go. Setup covers everything done once per design before production starts. Run is the per piece production work. Registration is how precisely multiple colors line up. Hand is how a printed or stitched area feels to the fingers.

If a supplier uses a word you do not recognize, ask. Nobody expects a distributor to know every shop term, and a thirty second question beats a wrong assumption on a five hundred piece order. A full glossary sits near the end of this guide for quick reference.

How to choose a method in four questions

You do not need a flowchart the size of a wall. Four questions, asked in order, narrow the field fast.

Question one: what is the product made of?

Material narrows the field more than anything else. Woven and knit fabric points to screen print, embroidery, transfers, direct to garment or sublimation (if it is polyester). Rigid plastic points to pad print, UV printing or laser on certain grades. Bare or powder coated metal points to laser, pad print or UV. Glass and ceramic point to screen print, pad print, sublimation on coated pieces or etching. Leather and leatherette point to debossing, laser or foil. Paper and card point to offset or digital printing, plus foil and blind embossing.

Question two: how many colors, and how fixed are they?

A one color logo can be done almost any way. Two or three flat colors suit screen and pad printing well. A logo with gradients, shadows or a photograph steers you to digital, UV, sublimation or direct to garment. If the brand color is non negotiable, think about methods that can match a named color: screen and pad ink mix to a target, while thread and laser behave differently, as the color section later explains.

Question three: what is the quantity?

Below roughly fifty pieces, setup dominates the cost, so low setup methods tend to win. Above a few hundred, run cost dominates and tooled methods get cheaper per piece. Embroidery is the odd one: its cost follows stitch count more than quantity, so the curve is flatter.

Question four: what impression should it make?

A conference giveaway and an executive gift are different jobs. A one color pad print on a pen is perfectly right for a crowd. A pen intended for a board member might call for laser engraving on metal. A beautiful engraving on a flimsy plastic barrel wastes the engraving, and a thin print on a premium leather folio wastes the leather.

1MaterialWhat isbeingdecorated2ColorsHow many,how fixed3QuantitySetupagainst run4ImpressionGiveaway orkeepsake
Ask the four questions in this order and the shortlist usually shrinks to one or two methods.

A decision for the in between cases

Real jobs rarely land cleanly on one answer. When two methods both qualify, break the tie with a simple rule: pick the one with the lower risk of a surprise. A method you have used on that product before, with a supplier who has shown you samples, beats a theoretically better method nobody has tested.

Does the logo need more than three flatcolors?Yes, gradients or photoLook at UV, digital orsublimationNo, one to three flat colorsScreen or pad print, or laserif one tone
A quick branch for the first cut on a hard goods order.

Screen printing: how the process physically works

Screen printing pushes ink through a fine mesh that has been turned into a stencil. One screen is made per ink color. A two color logo means two screens, two passes and a registration step in between. The ink lands as a layer you can feel with a fingernail, and on a fabric it sits on top of the fibers rather than soaking in like a dye.

Making a screen, step by step

  1. Artwork is separated. Each color becomes its own black and white film or digital positive. For a two color logo you have two separations, one per screen.
  2. The mesh is coated. A frame stretched with mesh is coated with a light sensitive emulsion and dried in the dark.
  3. The image is exposed. The positive sits against the coated screen under strong light. Where the light reaches, the emulsion hardens. Where the black artwork blocks it, the emulsion stays soft.
  4. The screen is washed out. Water removes the soft emulsion and leaves open mesh in the shape of the artwork. That open mesh is the stencil.
  5. The screen is registered on the press. The operator clamps each screen so it lands exactly where it should relative to the others and to the product.
  6. Ink is pulled. A rubber blade called a squeegee drags ink across the screen and forces it through the open areas onto the product.
  7. The ink is cured. Plastisol type inks on apparel are heated until they fuse. Water based and other systems dry or cure differently. Hard goods inks may air dry or cure in a tunnel.

Every one of those steps is either setup (steps 1 to 5) or run (steps 6 and 7), and that division is exactly why screen printing gets cheaper per piece as quantity grows. The expensive thinking happens once.

Mesh count and what it does

Mesh is described by threads per inch. A low count mesh has big openings and deposits a thick ink layer, which suits bold shapes and opaque inks on dark fabric. A high count mesh has tiny openings and deposits a thin layer, which suits fine detail and halftones. The decorator picks the mesh for the job, and you rarely need the number, but you should know the tradeoff: thick ink looks richer and bolder, thin ink holds detail and feels softer.

Ink families in plain terms

Different substrates need different inks. Plastisol is common on apparel, sits on the surface and gives strong opacity. Water based ink soaks into fabric more, gives a softer hand and suits light fabrics. Solvent and two part inks are used on hard goods like plastics and metal, where adhesion needs chemistry rather than just heat. UV curable screen inks cure instantly under lamps and are common for rigid items and stickers. A decorator chooses the family from the substrate, and the choice drives durability, so it is a fair question to ask.

Where screen printing shines

Large imprint areas, bold flat color, high opacity on dark products, and heavy runs. Back prints on shirts, canvas totes, drawstring packs, aprons, banners and many flat promo items are classic screen jobs. It is the workhorse for a reason: once the tooling exists, each additional piece is quick and consistent.

Top color inkThe logo colors you seeWhite underbaseKeeps colors bright on darkfabricFabric fibersInk bonds to the surface
A screen printed mark on a dark shirt is a stack, with the underbase doing the quiet work beneath the colors.

Screen printing: color count, underbase, registration and cost

The number of colors is the main cost lever in screen printing because every color is its own screen and its own pass. Setup scales roughly with the count, and so does the run, since each piece goes through the press once per color. A two color logo is not twice a one color logo in every line of the quote, but it is close enough that clients should hear the rule early.

One color versus multi color

A one color job is the simplest thing a screen printer does. One screen, one pass, no registration worries. It suits logos that are naturally single color, and it is why so many promo bags are printed in a single ink. Two and three color jobs add alignment risk: if the second screen lands a hair off, you see a thin gap or an overlap where colors meet. Good decorators plan for this with a small overlap called a trap. Four or more colors push the cost up and tighten tolerance, and at that point it is fair to ask whether digital or UV would be a better fit.

The underbase question

White ink printed first is the underbase. On a white or light product it is unnecessary. On a black, navy or other dark product it keeps the top colors from looking dull. The decorator may count it as an extra color for pricing, and some quotes fold it in without saying. A two color logo on a black shirt can quietly become a three color job. It is a fair line item, but it should be visible on the quote.

Spot colors and halftones

Screen printing is excellent at spot colors, meaning a single mixed ink matched to a named target. Brand reds and blues usually come out well. Photographs and gradients are different. To fake a smooth tone, the printer breaks the image into a pattern of dots called a halftone. On a smooth surface with a fine mesh, halftones look good. On a textured fabric or a rigid item with a coarse mesh, they can look blotchy. For most promo work, if the client's logo needs a halftone to look right, check a sample before you promise it.

Worked example, illustrative numbers

Take a hypothetical order of 200 canvas totes with a two color logo. Suppose the decorator charges a general, illustrative setup of around $40 per screen, so $80 for two screens. Suppose the run adds about $1.10 per bag for both colors at that quantity, so $220. Decoration for the job comes to about $300, or $1.50 per bag, before the bag itself.

Now run the same logo on 500 bags. Setup stays at $80. The run might drop to $0.80 per bag because the press is rolling longer between changeovers, which gives $400. Decoration is $480 in total, or $0.96 per bag. The setup did not grow while the quantity went up two and a half times, which is why the per piece number fell by more than a third.

These figures are illustrative only. Actual rates vary by supplier, product, ink type and quantity.

Illustrative figures$3.150 pcs$2.1100 pcs$1.5200 pcs$0.96500 pcs$0.751,000 pcs
Illustrative decoration cost per bag for a two color screen print, falling as the same setup is spread over more pieces.

Registration, in practice

Registration is the quiet quality marker. On a multi color job, ask how the decorator holds alignment, whether they use registration marks on the artwork, and what their tolerance is. Thin outlines around a color fill are the hardest things to hold. If your client's logo has a tight outline, a decorator may suggest removing the outline or thickening it so that tiny shifts do not show.

Fine line limits

Ink fills in thin lines. Fine text under a certain size may close up or look uneven. Suppliers publish minimums for line weight and text height, and they vary with mesh and ink. The practical lesson is to ask for the minimum before the designer reduces the logo to fit a small area, not after.

One colorOne screen, onepassTwo colorsRegistrationstarts to matterThree colorsMore setup,tighter toleranceFour or moreCompare digitalor UV
Each added color raises setup and run effort, and the step from three to four colors is where many jobs should be rechecked against digital options.

Pad printing: curved, small and awkward surfaces

Pad printing transfers ink from an engraved plate to a soft silicone pad, then presses the pad onto the product. The pad is flexible, so it wraps around curves, dips into recesses and lands on slightly textured surfaces that a flat screen cannot touch. Think of a rubber stamp that can wrap around a pen barrel.

How it works, step by step

  1. The cliche is made. The artwork is etched into a flat plate, called a cliche. The etched lines are shallow wells.
  2. Ink fills the wells. Ink is spread across the plate, and a blade wipes the excess off the surface so ink remains only in the wells. Many machines use a sealed ink cup that rides across the plate, which keeps the ink from drying out and keeps the process tidy.
  3. The pad picks up the image. The pad presses down onto the plate and lifts the ink out of the wells. The surface of the ink tacks up slightly as solvent leaves it.
  4. The pad stamps the product. The pad moves over the fixtured product and presses the ink onto the surface. The ink releases from the pad because it has a stronger affinity for the product.
  5. The ink cures. Depending on the ink system, it dries in air, in a warm tunnel or under light. Two part inks cure through a chemical reaction and need hours or days to reach full hardness.

Fixtures and positioning

Because every product is a different shape, pad printing depends on a fixture, a small jig that holds the item in the exact position under the pad. Fixturing is part of setup. A pen barrel needs a cradle. A golf ball needs a cup. A cylindrical bottle needs a rotating holder. A new product can mean a new fixture, which is why some decorators charge more for items they have not run before.

What pad printing does best

Pens are the classic example, along with stress balls, key tags, golf balls, calculators, USB drives, small plastic drinkware, lighters, tape measures and countless molded plastic items. It reproduces fine detail well on small areas and gives crisp edges on small text. The pad can reach recesses and curved edges, so a logo can wrap partway around a barrel.

Limits

Imprint areas are small because a pad can only move so much ink at once. Multi color work is possible, since each color is a separate plate and a separate pass, but alignment between passes limits how intricate the design can get. Ink adhesion depends on surface energy, and some plastics, such as certain polyolefins, resist ink unless they are treated first with flame, plasma or a primer. Plastics that look the same can behave differently, so the right test is a sample on the real material.

Ink fillsplatePad liftsimagePad stampsproductProduct curesPad print
Pad printing is a loop: ink the plate, lift the image, stamp the product, and go again.

Cost shape

Setup covers plate and fixture, and in general terms it is a flat fee per color. The run charge per color per piece falls with quantity. A thousand pens with one color is a very common job, and the economics get very good at that scale. The caution is durability: a bargain pad print can scratch off with normal use if the ink was wrong for the plastic. Ask what ink system is used and request a test on the actual product.

Embroidery: thread, stitch counts and digitizing

Embroidery stitches the design into the product. Before anything is sewn, the artwork must be converted into a stitch file by a process called digitizing. A technician decides the stitch type, direction, density and sequence for every part of the logo. Then a machine with many needles sews the design, changing thread colors automatically. A good digitizer is the difference between a crisp logo and a puckered, lumpy one.

What digitizing actually does

A logo on a screen is shapes. A logo in thread is thousands of small stitches with a direction and a density. Large areas are filled with a fill stitch, which lays rows of thread. Narrow columns and borders use a satin stitch, a dense zigzag that looks smooth and glossy. Fine outlines use a run stitch, a single line. The digitizer picks the order, because stitching a dense area first can pull the fabric and distort things sewn later. They also add underlay stitching, a layer beneath the visible stitches that stabilizes the fabric and lifts the thread.

The result is a file the machine reads. The digitizing fee is a one time cost, and the file belongs in an archive for reuse. Repeat orders typically skip the fee, but only if the supplier kept the file.

Stitch count and cost

Stitch count is the number of individual stitches in the design, and it is the main driver of run cost. A small left chest logo might be a few thousand stitches, a larger or denser design well beyond that. Suppliers price in tiers by stitch count or per thousand stitches. A big solid fill uses a huge number of stitches, so it costs more and can stiffen the garment. A design with open space and fewer filled areas uses fewer stitches and often looks more elegant.

Backing and stabilizers

Fabric is not stable under needles. A backing, also called a stabilizer, goes under the fabric to keep it from stretching or puckering. Tearaway backing is removed after stitching and suits stable woven fabrics. Cutaway backing stays and suits knits, such as polos and performance wear, because the stitching would otherwise distort as the garment stretches. Thin, stretchy or very light fabrics are the hardest, and a good shop will tell you when a fabric needs a different approach or a different product.

Thread

Most thread is polyester or rayon. Polyester is strong, colorfast and holds up to repeated washing and bleach. Rayon has a high sheen and is popular for decorative work. Thread comes in a limited chart of numbered colors, so embroidery matches a brand color by choosing the nearest thread. It is close but not identical to an ink match, and metallic or specialty threads behave differently on the machine.

Caps versus flat items

Caps are stitched on a curved frame that holds the crown and often run with a different process than flat garments. The seam down the middle of a structured cap affects where the design can sit, and most caps accept a smaller height than a chest area. Designs that work on a shirt may need to be resized or simplified for a cap. If a client wants the same logo on both, ask for a cap sample or a proof sized for the cap.

Small text limits

Thread has thickness, so very small lettering closes up. As a rough rule of thumb, text shorter than about a quarter inch tall tends to look poor, and a thin serif font is worse than a sturdy sans. If the logo has a tagline in tiny letters, expect the decorator to suggest dropping it or enlarging it.

Fewer stitchesMore stitchesSmall textlogoLight, openLeft chestlogoThe common jobLarge chestfillDense, stifferBack pieceHeavy, premium
Typical stitch counts grow quickly with size and fill, and cost follows them.
Worked example, illustrative numbers

A hypothetical logo of 7,000 stitches on 50 polos. Suppose the supplier prices at a general, illustrative rate of about $1.20 per thousand stitches. The run is about $8.40 per shirt, or $420 for 50, plus a one time digitizing fee of perhaps $60. Compare a one color screen print on the same polo that might add around $2 per shirt after a small setup. The gap is why embroidery is often positioned as the premium choice. It is also why a client who wants "just a little logo" should hear that dense fills and many color changes raise the price quickly. Real rates vary by supplier, fabric and quantity.

Laser engraving: materials, contrast and what it cannot do

Laser engraving uses a focused beam to remove or alter a thin layer of the surface, leaving a mark. There is no ink, no screen and no plate. The artwork goes from the file straight to the laser path, which is why setup is low and why the method is popular for personalization and small runs.

How the beam makes a mark

The result depends on what the beam hits. On a powder coated or painted metal, the laser vaporizes the coating and exposes the bare metal underneath, which makes a light mark on a dark finish. On bare stainless steel, a different laser setting oxidizes the surface and leaves a dark mark, which is called annealing. On wood and leather, the beam burns a shallow depression and the char darkens it. On glass, the surface fractures into a frosted look. On certain plastics and anodized aluminum, the beam changes the color or removes the dye layer. Each case is a different physical effect, and a decorator chooses the laser type and settings to suit.

Material notes

Metal drinkware with a powder coat is the standout use: the mark is permanent, crisp and very high contrast. Anodized aluminum takes a clean mark. Leatherette, leather, wood, bamboo and cork engrave well. Glass engraves into a frosted effect. Some acrylics and coated plastics work, but many plastics melt or discolor, so test first. Transparent and highly reflective materials can be difficult.

Depth and the hand

A laser mark can be nearly flat or noticeably recessed, depending on power and passes. Deeper marks feel tactile and hold up to heavy wear, and they take longer, which costs more. For a quick logo on a coated tumbler, the mark is usually shallow because the coating is thin. For wood, depth contributes to the look.

What it cannot do

Color. A laser mark is a single tone set by the material, not by the brand. A client who needs brand red cannot get it from a laser alone. Contrast also varies: a light colored coating shows less contrast than a dark one, and some finishes look faint in certain lights. Photographs can be rendered as engraved dots but look best on materials with good tonal response, such as wood.

Cost shape

There is little or no per color charge because the result is one tone. The cost per piece depends on how long the laser spends marking, so a small simple logo is cheap and a large, detailed mark costs more. Setup is typically low, often a file check and a position fixture. For quantity, laser is excellent from one piece up to a few hundred, and past that it can still compete if cycle time per piece is short.

Powder coated metalBare stainless steelWhat the beamdoesRemoves the coatingOxidizes the surfaceMark colorLight, bare metalDark, annealedContrastHigh on dark coatsModerate, view anglemattersDurabilityPermanentPermanent
The same laser behaves differently on coated metal and bare metal, which changes what the client sees.

Digital direct to substrate and UV printing

Digital direct printing places tiny droplets of ink straight onto the product from a print head, building any color from a small set of process inks. The file goes straight to the machine. There are no screens, no plates and no per color charge. That is why digital is the answer to a full color logo in a small quantity.

UV printing in particular

UV printing uses inks that cure instantly under ultraviolet light, which means the ink dries the moment it is printed. It prints on rigid and semi rigid items that conventional inkjet cannot handle well: acrylic, wood, metal, glass, many plastics, leather and coated items. A flatbed machine holds the item on a flat table, and a rotary attachment turns a cylindrical item such as a tumbler or bottle. Because the ink cures on contact, it holds sharp dots and can be layered. Some machines add a white ink layer for dark products and a clear varnish layer for texture or gloss, so the finish can be tactile.

Strengths

Full color from one file. Gradients and shadows. Photographs. Small quantities without setup tooling. Variable data, such as different names on each item. A short lead time, since nothing needs to be built first.

Limits

Imprint area is limited by the machine bed or the rotary fixture. The surface must be clean and receptive. Some materials need a primer for the ink to bond, and others have release agents or coatings that fight adhesion. Color is built from process inks, so very saturated or specific brand colors may land differently than a mixed spot ink. Ink laid in a thick layer on a soft surface can crack when flexed, and a UV print on fabric is usually not the right approach for wearable items.

Cost shape

Cost per piece depends on the imprint area and the ink volume, not on the number of colors. Setup is a file check and sometimes a fixture. For small runs of multi color work, digital typically beats tooled methods on total price. At very high quantities, a screen or pad process often becomes cheaper per piece for a simple logo.

Digital and UVDigital, UV or sublimation at scaleLaser, pad or one color printScreen or pad printLaserUVScreenPadDigitalQuantity →Color complexity →
Methods placed by how complex the artwork is and how much total volume the job has, as a rough guide rather than a rule.

When digital is the wrong call

If the logo is a single flat color on a product that suits pad printing, and the quantity is a thousand, pad printing will probably be cheaper and tougher. If a client needs exact metallic or fluorescent inks, a tooled method with that ink is the right tool. Digital is a strong default for full color, not a universal answer.

Sublimation and direct to garment printing

These two methods are often confused because both are digital and both produce full color on textiles. They work very differently.

Dye sublimation

Sublimation uses heat to turn a solid dye into a gas that bonds with a polymer. The image is printed in sublimation ink onto a transfer paper first. The paper is then pressed against the product under heat and pressure, and the dye converts to a gas and permeates the surface, then locks in as it cools. The image becomes part of the material rather than a layer on top. There is no hand, meaning you cannot feel it, and it does not crack, peel or wash away.

What it needs. The substrate must accept the dye: polyester fabric, or hard goods coated with a polymer layer made for the process, such as many mugs, mouse pads, phone cases and coasters. Cotton does not hold the dye.

The white garment limit. Sublimation ink is transparent. It adds color to whatever is underneath, and it cannot print white. That means white or very light polyester gives the truest color, and dark products distort or hide the image. A client who wants a full color photo on a black polyester shirt cannot have it by sublimation alone.

Strengths. Edge to edge, all over printing on polyester items. Vivid, gradient rich color. Excellent durability. A soft feel on fabric, since there is no ink layer.

Limits. Substrate restrictions are strict. Cut and sew construction for all over prints means the product is often made from printed fabric rather than printed after it is sewn. Color is built from process inks, and a heat press can shift a shade slightly.

Direct to garment printing

Direct to garment, often shortened to DTG, is an inkjet printer built for textiles. It sprays water based pigment ink directly into the fibers of a garment, typically cotton or cotton rich blends. A pretreatment is applied to dark garments first so the ink sits up instead of soaking in, and the print is cured with heat afterward.

Strengths. Full color from one file, with no setup per color. One piece or a few dozen are cost effective. Detail and gradients look good on smooth cotton. The hand is soft on light garments.

Limits. Best on natural fibers and on 100 percent cotton or high cotton blends. Polyester and poly blends can be tricky because the ink does not bond as well and dye can migrate. Dark garments need pretreatment and a white underbase layer, which slows production and adds cost. For large runs of a simple logo, screen printing is typically cheaper per shirt. Colors on dark fabrics are slightly less opaque than screen inks.

SublimationPolyester,coated hardgoodsDirect togarmentCotton andcotton blendsFullcolor,smallruns
Sublimation and direct to garment overlap on full color and short runs, but they need opposite fabrics.
Worked example, hypothetical scenario

A hypothetical client wants 60 team shirts, each with a full color illustration. If the shirts are white polyester, sublimation delivers an all over, soft hand result with no per color charge. If the shirts must be black cotton, direct to garment with a white underbase is the realistic path, and the client should expect the colors to look a little softer than on white. If the client needs 600 shirts with a two color version of the same artwork, screen printing probably wins on cost. The same artwork, three different best answers.

Heat transfers, patches, labels and tactile methods

Beyond the big five, a set of other methods fills gaps. Some are variations on the same ideas, and some are chosen because they solve a specific problem that nothing else solves cleanly.

Heat transfers

A heat transfer is a design made on a carrier sheet, then pressed onto the product with heat and pressure. The design might be screen printed on the sheet, printed digitally, or cut from a flat vinyl film. Transfers separate the decorating step from the product step: the artwork can be produced in volume at one place and applied at another, or applied a few at a time, even one at a time. That makes them useful for names and numbers, small runs, mixed order sizes and items where direct printing is awkward. Cut vinyl gives bold flat color and a smooth, slightly rubbery feel. Printed transfers can carry full color. The tradeoff is hand: a transfer is a film on top of the fabric, it can feel plasticky on a large area, and edges can lift or crack after many washes if the application was poor.

Woven and embroidered patches

A patch is a decorated piece that is made separately and then attached to the product by sewing, heat sealing or an adhesive backing. Embroidered patches are stitched on a twill base with a finished edge called a merrowed border. Woven patches are made on a loom and can hold finer detail than embroidery because the threads are thinner. Printed patches are decorated by screen or dye sublimation. Patches make sense when the client wants the same crisp mark on fabrics that embroidery would distort, like thin technical shells, or when the item cannot go under an embroidery machine, like a finished bag with an awkward shape. They also allow placement flexibility, because the patch can be removed or replaced. The cost is the separate patch order, which has its own minimums and lead time.

Labels and tags

Woven labels, printed neck labels, leatherette tags and hang tags are another category. These are small branded elements sewn or attached to a product. They are appropriate for uniform programs or retail style goods where the brand mark should be discreet or where the manufacturer's tag is being replaced. Quantities are usually higher and per piece costs lower, but production takes more time because the labels are a made to order item.

Debossing and embossing

Debossing presses a design into a material so it sits below the surface. Embossing raises the design above the surface. Both use a metal die and pressure, and heat helps on some materials. They are used on leather, leatherette, paperboard, vinyl and some soft touch covers. A blind deboss has no color, only shape and shadow, and it looks understated and premium. A foil deboss adds a thin metallic or colored film transferred by heat into the recess. The setup includes making the die, which is a fixed cost per design. Fine detail needs a minimum line width, and a thin or soft material can lose crisp edges.

Etching

Etching, in the promo world, usually means chemical or abrasive marking of glass and metal. Sandblast etching uses a stencil and abrasive to frost glass. Acid etching uses a chemical to create a frosted effect on glass. Metal can be etched with chemicals or electricity. Etching gives a permanent, elegant, one tone mark. It is slower and more specialized than laser for most promo jobs, and many shops use laser to produce a similar frosted look.

Foil stamping

Foil stamping uses heat, pressure and a metal die to transfer a thin metallic or pigmented foil onto a surface. It is common on notebooks, folios and paper products and gives a bright, mirror like finish that ink cannot match. It is limited to flat, simple shapes and requires a die.

1Heat transferNames, numbers, mixed sizes2PatchesFabrics that resist stitching3Labels and tagsDiscreet branding4DebossingLeather and paper,understated5EtchingFrosted glass and metal6Foil stampingBright metallic on flat goods
Six supporting methods, each solving a specific problem the main methods handle awkwardly.

Side by side: the methods compared

When you are building a quote, a table beats memory. These comparisons condense what the earlier sections described. The dollar figures are general, illustrative ranges that vary by supplier and are not Inkgility prices.

Core methods compared on cost structure and fit
FactorScreen printPad printEmbroideryLaser engraving
Setup typeScreen per colorPlate and fixture per colorDigitizing, onceFile and fixture
Illustrative setupModest, per colorModest, per colorOne time stitch file feeLow or none
Run cost driverNumber of colorsNumber of colorsStitch countEngraving time
Best substratesFabric, bags, flat itemsPens, small molded plasticsPolos, caps, jacketsCoated metal, wood, leather
Imprint sizeLargeSmallSmall to mediumSmall to medium
Fine detailModerateGoodLimitedVery good
Color matchingMixed ink to spot colorMixed ink to spot colorNearest threadNone, one tone
FeelInk layer on surfaceThin ink layerRaised threadRecessed or etched
Full color and specialty methods compared
FactorDigital and UVSublimationDirect to garmentHeat transfer
SetupFile checkFile and heat press setupFile and pretreatmentTransfer sheet made first
Color count costNoneNoneNoneDepends on type
Best substratesRigid items, drinkwarePolyester, coated hard goodsCotton garmentsMany fabrics
Dark productsWhite ink layer neededPoor, ink is transparentUnderbase neededOpaque films available
FeelThin cured layerNo hand, part of the materialSoft on light garmentsFilm on top
DurabilityGood if cured and preppedExcellentGood, washes soften itGood, varies with application
Which method tends to win by quantity
Quantity bandTypical front runnersWhy
1 to 24Laser, digital, UV, direct to garment, transferSetup would dominate any tooled method
25 to 100Digital, UV, embroidery, laserEmbroidery file fee amortizes, digital stays cheap
100 to 500Screen, pad, embroideryPer color tooling is spread across more pieces
500 and upScreen, pad, sublimation in volumeRun cost dominates and tooling pays off
SmallrunsLargeareasFinedetailFullcolorDurabilityScreen printPad printEmbroideryLaserDigital and UVGeneral guide, not a measurement.
A rough scorecard of where each core method is strong, with three meaning strongest and zero meaning not suited.

Reading the tables honestly

Tables flatten nuance. Any real product might break a rule, a supplier might use unusual equipment, or a client might have a constraint that outweighs cost. Use these as a starting shortlist and then verify with a sample on the actual product.

Matching the method to the product category

Most jobs begin with a category, so this is the practical lookup. For each, you will see the usual methods and the traps that come with them.

Drinkware

Stainless steel tumblers and bottles with a powder coat: laser is the first choice for permanence and a premium look, and UV printing offers full color if the client needs it. Plastic tumblers and cups: pad print and screen print on straight sides, and UV for full color. Ceramic mugs: screen print or decal, and sublimation on coated mugs. Glassware: screen print, etching or laser. Drinkware gets washed, bumped and drunk from, so durability is the first question. The article on branded drinkware materials and decoration reality goes deeper on what survives the dishwasher.

Pens and writing instruments

Pad print for plastic barrels at volume, laser for metal pens, and UV for full color on larger barrels. Pen barrels are narrow and curved, so imprint area is often a small band. Wide logos shrink or must be stacked. The clip and the barrel texture limit placement. A metal pen with a coating can engrave beautifully while the same logo printed on it might wear at the contact points.

Apparel

T-shirts and hoodies: screen print for volume and large areas, direct to garment for short runs and full color, heat transfer for names and numbers, embroidery for a premium left chest. Polos and jackets: embroidery is the default. Caps: embroidery, patches, and sometimes transfers. Performance polyester: sublimation if white or light, otherwise embroidery or special inks. Knowing the fiber matters more than the garment name. The Trade Print program page names screen print, embroidery and direct to garment for apparel, so use those as your default vocabulary when quoting through a program like that.

Bags

Cotton and canvas totes: screen print for volume, direct to garment for small runs. Non woven polypropylene bags: screen print, since the surface is slightly textured and ink adheres well. Nylon and polyester backpacks: screen print with the right ink, embroidery or patches on structured areas. Seams, zippers and handles interrupt the printable area, so check where the flat panel really is.

Tech accessories

Chargers, cables, power banks, earbuds, USB drives and phone stands are small, hard and often glossy. Pad print and UV are common, and laser works on metal housings. Soft touch coatings can look wonderful and scratch easily, so test the finish with the exact method.

Notebooks and paper goods

Debossing and foil stamping on covers, screen print or digital print on paper covers, laser on leatherette. A blind deboss on a soft cover looks classic. Fine foil lines need a minimum width.

Hard goods and desk items

Acrylic awards, wood items, key tags, coasters and magnets: UV, laser, screen print and pad print, depending on shape. Wood engraves richly with a laser. Acrylic prints well with UV and can take a frosted engraving.

What is the surface?Coated or bare metalLaser first, UV orpad print asalternatesMolded plasticPad print or UV,test adhesionFabric, cotton or polyesterScreen print,embroidery, directto garment orsublimation
Material first: a simple branch for the hard goods that account for most promo orders.

Artwork preparation and color matching, method by method

Most proof delays begin with the wrong file. A little discipline at the start saves days, and the requirements differ more by method than most people expect.

Rules that apply to everything

Send vector artwork whenever possible. A vector file is built from paths and curves, so it scales to any size without blurring and converts cleanly into screens, plates, laser paths and stitch files. Typical vector formats are vector PDF, EPS and SVG. A raster file such as a JPG or PNG is built from pixels, and a small one looks soft or jagged when enlarged. If a client only has a raster, ask for the original source files from their designer, or plan for a redraw, and say so up front.

Convert text to outlines. If a font is not outlined, the supplier's computer may substitute another, and the proof will not match what the client approved. Name the colors. Brand guidelines almost always list them. If they do not exist, ask the supplier to match to a printed sample and note on the order that the match is approximate. The primer on CMYK, RGB and spot color explains why those systems behave differently. Inkgility's artwork proofer also runs preflight checks for resolution, color space, trim and bleed match, safe zone, fonts, overprint risk and page count, which catches many of these problems before anyone touches a machine.

Screen printing artwork

Separate artwork into flat spot colors, one per screen. Avoid hairlines. As a general rule of thumb, line weights below roughly one quarter of a point are risky, and many shops want thicker. Keep small text legible, since ink fills in. Avoid gradients unless you intend a halftone, and ask for a sample of the halftone on the real substrate. Allow trapping where colors touch, or accept the decorator's advice about it.

Pad printing artwork

Small areas, so simplify. Remove taglines that cannot be read at the imprint size. Pad plates etch fine lines well, but curved surfaces stretch the image slightly, and the decorator may adjust for that. Provide the maximum height and width of the imprint, not just the logo, so the proof shows the real fit.

Embroidery artwork

Embroidery wants bold shapes. Tiny text, thin lines, gradients and shadows do not translate. Send the logo in vector format and note the preferred thread colors. The digitizer will simplify details that thread cannot render. Ask for a stitched sample or a stitch simulation image, and approve the digitized version, not only the artwork.

Laser artwork

Laser works from vector paths for lines and from bitmap for shaded images. Solid fills are slow and heavy, outlines are faster and lighter. Contrast is set by the material, so you are choosing between a filled look and an outlined look. Ask what line weight reads well on the actual surface.

Digital, UV and sublimation artwork

Resolution matters here, since the printer lays down what it is given. Many shops want raster images at a high pixel density at final size, and vector for logos. Include bleed on all over sublimation prints, because heat pressing can shift the paper slightly, and a white gap at an edge is a common miss. Convert to the color space the supplier requests and expect color shifts from screen to print.

Color matching expectations

Different methods give different color results, and clients rarely know. Set expectations in the quote conversation.

  • Screen and pad ink can be mixed to a named spot color, so a brand color usually lands close on the intended substrate. The base color of the product still influences the result.
  • Embroidery thread comes from a limited chart. The decorator picks the nearest numbered thread. It will be close, not identical, and thread has a sheen that ink does not.
  • Laser has no color. It is one tone from the material.
  • Digital, UV and sublimation build color from process inks. Many brand colors reproduce well, but strongly saturated or very specific tones can drift, and dark substrates change the result.
Mixed spot inkClosest to targetProcess inkClose, can driftThreadNearest chart colorLaser markMaterial tone onlyDye in polymerDepends on base color
The same brand blue, shown as the five different results a client may actually get depending on the method.

A pre submission check

Before you send anything to a supplier, run the same short list every time. It takes two minutes and removes most of the reasons a proof comes back with questions. If you only have a raster file and no source, treat that as a flag, not a stop: it just means someone has to redraw the logo, and that time belongs in the schedule and the quote.

Vector file suppliedVector PDF, EPS or SVGFonts outlinedColors namedTarget numbers or a sampleMinimum line weight checkedImprint area confirmedMaximum width and heightRaster only, no sourcePlan for a redraw
A pre submission artwork check that works for nearly every method.

Setup fees and quantity math, with worked examples

Setup fees confuse clients because they feel like paying for nothing. In reality they pay for tools and time that exist whether you order ten or ten thousand. Explaining that in one sentence helps: the setup is what it costs to make the tool, and the per piece charge is what it costs to use it.

What each method's setup actually pays for

Screen printing: making screens and registering them. Pad printing: etching the plate and building the fixture. Embroidery: digitizing the design into a stitch file. Laser: file preparation and positioning. Digital and UV: file checks and sometimes fixtures. Debossing and foil: cutting the die. Patches and labels: making the patch or label art, and often a minimum production quantity.

The break even idea

Compare two methods by total cost at your actual quantity, not per piece cost at someone else's quantity. If method A has a high setup and a low run, and method B has a low setup and a higher run, there is a quantity where the lines cross. Below that, B wins. Above it, A does. The crossing point moves with the design, the product and the supplier, so calculate it with real quotes.

Worked example, illustrative numbers

Hypothetical job: a one color logo on a plastic item. Method A, pad print, has an illustrative setup of $60 and a run of $0.35 per piece. Method B, UV printing, has an illustrative setup of $15 and a run of $0.90 per piece.

At 50 pieces: A is $60 plus $17.50, so $77.50. B is $15 plus $45, so $60. B wins. At 100 pieces: A is $60 plus $35, so $95. B is $15 plus $90, so $105. A edges ahead. At 500 pieces: A is $60 plus $175, so $235. B is $15 plus $450, so $465. A wins clearly.

The crossover here falls somewhere in the neighborhood of 80 pieces. These are made up figures to show the math, not real prices from anyone.

Reorders

Tooling can be reused. Screens and plates are usually stored for a period, and embroidery files are archived. A reorder often skips the setup charge, or charges a smaller repeat fee. Ask about storage policy and how long tooling is kept, and keep your own copy of artwork and approved stitch files. If the client changes anything, such as a color or a line of text, you may be paying setup again.

Hidden multipliers

Extra locations each carry their own setup and run. Color changes on a run, such as three different shirt colors with one logo, may mean separate print runs or a changeover fee. Rush work is priced at a premium. Fine detail may slow production. Ask the decorator to list every charge, and for any quote you pass on, itemize setup, run, and any extra location so the client can see where the money goes. For rush work, see what ships in five days and what does not.

Illustrative figuresPad print setup$60Pad print run$35UV setup$15UV run$90
Illustrative total cost of a one color job at 100 pieces, split into what you pay once and what you pay per piece.

Proofing, samples, imprint area and multiple locations

A proof is the cheapest insurance in decorated merchandise. It fixes what both sides agreed to before anything is produced.

Digital proofs

A digital proof, also called a mockup or virtual proof, shows the logo on the product with its size, position and colors. It confirms placement and artwork, not the physical finish. Check the size in inches, not only the picture. Check spelling and phone numbers. Check which colors are specified. Approve in writing so there is a record.

Pre production samples

A physical sample is made on the actual product with the actual method. It confirms color, contrast, adhesion, hand and quality, and it takes time and often costs extra. For large or high stakes orders it is worth it. For repeat orders of a proven design, it may not be needed. A sample is also the best way to test a plastic you have never printed on, a coated metal you have never engraved, or a fabric you have never stitched.

Imprint area

Every product has a maximum imprint area, and it is smaller than most clients expect. A pen barrel might allow a band under a half inch high. A tumbler might allow a few inches. A tote might offer a large panel with seams around it. Match the logo shape to the area early on. A wide horizontal logo on a narrow product shrinks until it is unreadable, while a stacked version of the same logo may fit well. Ask for the real imprint area from the supplier, not a catalog estimate.

Placement

Where the logo sits matters as much as how big it is. On a polo, left chest is standard. On a cap, the front center panel. On a tumbler, away from the seam and handle. Placement rules also depend on the method, since embroidery needs flat stable fabric, pad printing needs a reachable surface, and laser needs clear line of sight.

Multiple locations

A second imprint position, such as a sleeve, a back print or the other side of a pen, generally carries its own setup and run charge. A quote that lists one location is a quote for one location. Some products are decorated on a rotary or multi position machine that makes extra locations cheaper, but never assume.

Artwork inVector file and colorsDigital proofSize and positionApprovalWritten sign offSampleOptional, on real productProduction
A typical proofing path from artwork to approval, with the physical sample as the optional step that pays for itself on larger jobs.

Reading the area as layers

It helps to picture the imprint area as boxes inside boxes. The product has hardware, seams and curves that nobody can print across. Inside that is the zone the method can physically reach. Inside that is the maximum imprint area a supplier will quote, and your logo should sit inside it with some margin rather than touching the edge.

12341Whole productSeams, curves, hardware2Printable zoneWhere the method canreach3Imprint areaMaximum artwork size4LogoFits with margin
The imprint area on a product sits inside the safe printable zone, which sits inside the whole item.

Durability testing you can do yourself

Suppliers will tell you their method is durable. You do not have to take that on faith. A handful of simple tests on a pre production sample tell you most of what you need, and they cost nothing but a few minutes. These are informal checks, not laboratory standards, and they are meant to catch obvious weakness, not to certify anything.

The fingernail and rub tests

Run a fingernail firmly across the imprint. Printed ink that lifts, flakes or scratches off is a poor bond. Then rub the mark hard with a dry cloth for thirty seconds, and again with a cloth dampened with water. Look for ink on the cloth and a visible change in the mark. Do this on pad printed pens, UV printed items and screen printed hard goods especially. A good bond shows nothing.

The tape test

Press a strip of ordinary adhesive tape firmly over the imprint, wait a moment, and peel it off sharply. If ink comes with the tape, adhesion is weak. This is a quick check for printed marks on plastics and coated surfaces. Embroidery and engraving will not fail it, because they are not a layer.

The wash test for textiles

Wash a sample garment several times following the care label, then compare it to an unwashed one. Watch for cracking, fading, edges lifting on transfers and puckering around stitching. Run a second test on a hot cycle if the client's use case is a uniform. Water based and discharge style screen prints fade differently from plastisol, and a transfer may show edge lift after repeated cycles when a screen print would not.

The dishwasher and soak test for drinkware

For drinkware that claims dishwasher safety, put a sample through several cycles. Inspect for dulling, peeling and fading at the rim and the contact points where it touched the rack. For items that are marked hand wash only, soak in warm soapy water and scrub with a soft sponge. Remember that a supplier's claim about dishwashers may assume a specific ink or cure method, so test the specific sample you are approving.

Abrasion and handling

Pens and tech accessories live in pockets and bags. Scrub a sample against a rough surface, carry it in a bag with keys for a few days, and look at the result. Soft touch coatings and glossy plastics show wear fast. A key tag or a phone case will take more abuse than a desk item.

Sun, sanitizer and sweat

Some items spend life outdoors or in contact with hand sanitizer, sunscreen and sweat. Leave a sample on a sunny windowsill for a couple of weeks, wipe it with an alcohol based sanitizer, and rub it with lotion. Dyes can fade in sun, and some inks soften when exposed to solvents. These are not scientific tests, but they reveal weaknesses quickly.

Cure time matters

Two part inks and some UV and pad inks continue hardening for a day or more after printing. Testing a sample moments after it was made can make a perfectly good bond look weak. Ask how long the ink needs to cure and test after that interval.

Fingernail scratchTen secondsDry and wet rubA minuteTape peelFor printed marksWash or dishwasherSeveral cyclesReal world carryDays in a bag
Escalating durability checks, from the quickest to the most demanding, with fewer samples surviving each stage.

The distributor's quoting checklist, and the mistakes that cost money

A good quote answers questions before the client asks them. Here is the list worth running through every time.

What to confirm before quoting

  1. The product and its material. Fabric content, coating, plastic type, finish.
  2. The method, and why. One sentence the client can understand.
  3. The artwork. Vector available, colors named, number of colors.
  4. The imprint area and position. Size in inches and where it sits.
  5. The number of locations. Each one is its own charge.
  6. The quantity and any split. Different sizes or colors can change setup.
  7. The setup charges. Itemized, with notes on reorder policy.
  8. The run charges. Including any underbase, specialty ink or additional color.
  9. The proof process. Digital proof, plus whether a sample is included or optional.
  10. The lead time. Production time and shipping, separately.
  11. The packaging and shipping needs. If the order ships straight to a client's customer, see how blind shipping works.
  12. The durability expectations. Dishwasher, outdoor use, uniform washing.

Mistakes that cost money

Quoting before checking the imprint area. A client approves a price assuming a wide logo will fit, and then the supplier explains it has to shrink to a third. Check the area first.

Forgetting the underbase on dark products. A quote that lists a one color screen print may still need a white layer on a black item, which can add a color to the count.

Not asking about digitizing reuse. Embroidery files are an asset. The first order pays for digitizing, and later orders should not. Ask that the supplier store the file, and keep your own copy.

Ignoring durability on printed hard goods. A pen with an untreated print can scratch off in normal use, and the brand looks sloppy in every meeting. Test a sample.

Skipping the proof. A hundred dollars on a sample is small next to a rejected order of thousands.

Overlooking multiple locations. Sleeve, back, second side: each carries its own charge.

Choosing a method on price alone. A cheaper method can be cheaper because it removes a color, shrinks the logo or swaps stitching for a printed patch. That might be fine, but the client should hear about it from you.

Mixing up laser and print results. Promising a brand color on a laser engraving is a mistake that cannot be fixed with a revised proof.

Material confirmedMethod explained inone lineImprint area andposition in inchesLocations countedSetup and run itemizedProof and sample planstatedLead time split intoproduction andshippingDark product underbaseunconfirmedAsk before you send
The short list to run before you send any decorated quote.

If you resell through a program with published tiers, the Trade Print tiers show how the discounts are structured, and you can apply to the program when you are ready. The program overview lists what it covers.

Troubleshooting decoration defects

Defects have causes, and knowing the likely cause lets you ask a better question when something goes wrong. Here are the common ones, organized by what you see.

Ghosting and halos

A faint outline or shadow around an imprint, or a faint second image offset from the first, is ghosting. In screen printing, it can come from a screen that moves slightly after the squeegee pass, a screen that is too close to the product, or poor registration between colors. In pad printing, a ghost can come from a pad that slides or lifts unevenly. Ask about registration and pad alignment.

Bleed and feathering

Ink spreading outside the intended edges is bleed. On fabric, it happens when too much ink is laid down or the fabric is absorbent, and on polyester it can also come from dye migration, where the fabric dye moves into the ink during curing. On hard goods, ink that is too thin can run on a slick surface. Fixes include a different ink, a blocker layer, or a lower cure temperature.

Cracking and peeling

A printed mark that cracks when the item flexes, or peels at the edge, points to weak adhesion or an ink layer that is too thick or poorly cured. On apparel, cracking after washing can come from under cured plastisol. On hard goods, peeling comes from a surface that was dirty, oily or untreated. Ask about cure temperature and time, and about surface prep.

Puckering in embroidery

Wavy fabric around stitches comes from too much density, wrong backing, too tight hooping or a design that pulls the fabric. A thin or stretchy item may need cutaway backing and a lighter design. The fix is usually in the digitizing and the stabilizer, not in re stitching.

Fuzzy or blocked small text

Small text that fills in on a print or looks like a blob in thread is a size problem. The remedy is to enlarge the text, simplify the font, or drop the line.

Fading

Marks that lose color over time can come from ink that was not matched to the substrate, from sun, or from repeated washing. Sublimation and laser tend to resist fading because the mark is part of the material, while some surface inks fade faster. Match the method to the use.

Uneven or patchy color

Streaks or thin spots in a solid area can come from uneven ink deposit, a worn screen, a dirty plate or poor pretreatment on a direct to garment job. On a laser mark, uneven depth comes from a surface that was not flat or a lens out of focus.

Wrong color

A color that looks off may be due to the substrate color showing through, the wrong ink mix, or a process color drift. Compare against the approved sample, not against memory.

What you seeFirst question toaskGhost outlineFaint shadowHow is registrationheld?Ink bleedSoft or spread edgesWhat ink and cure wereused?PuckeringWavy fabric at stitchesWhich backing anddensity?PeelingMark lifts at edgesWas the surfaceprepped?
Common defects, what you usually see, and the first thing to ask the decorator about.

Sustainability angles and a glossary

Clients increasingly ask whether a decorated product is responsible, and the honest answer depends on the method and on how the question is framed. Decoration is a small part of a product's footprint, but it is a part you can influence.

Where the methods differ

Screen printing uses inks and solvents for cleanup, and the screens are reclaimed and reused, so wastewater and chemical handling matter. Water based and lower solvent inks reduce some issues, though they bring their own tradeoffs. Pad printing uses solvent heavy inks in some systems, and the cleaning process matters. Embroidery uses thread and backing and creates no ink waste, though trimmed thread and backing scrap are waste, and polyester thread is plastic. Laser uses electricity and no consumables, but it creates fumes that need extraction. Digital and UV printing use small amounts of ink and generate little waste per print, and UV inks cure without evaporating solvent. Sublimation uses transfer paper that is discarded after use, and the process favors polyester, a plastic based fiber. Direct to garment uses water based inks and pretreatment chemistry.

The bigger levers

The decoration method matters less than the product choice and the quantity. A durable item that gets used for years has a smaller footprint per use than a cheap one that is discarded. Ordering what will be used, instead of a large overrun, avoids waste. Choosing a method that lasts, rather than one that fades in a season, extends life. A single recoverable mark, such as a patch that can be replaced, may let a product be reused. If a client wants to make environmental claims, be careful and specific. The article on promo product sustainability certifications versus greenwashing is a good place to start before you put any claim in writing.

Choose productPick durablemethodOrder what isusedUse and reuseProduct life
Choices that shorten or extend a promotional product's useful life, from specification through to end of use.

Glossary

Substrate: the item being decorated.

Imprint area: the maximum space where a mark can go.

Setup: one time work done before production, such as making screens, plates or stitch files.

Run: per piece production work.

Screen: a mesh stencil used to push ink onto a product.

Mesh count: threads per inch of the screen mesh.

Emulsion: the light sensitive coating that hardens to make a stencil.

Squeegee: the blade that pushes ink through a screen.

Plastisol: a common apparel ink that cures by heat.

Underbase: a first layer of white ink under colors on dark products.

Registration: how precisely multiple colors line up.

Trap: a small overlap between colors to prevent gaps.

Halftone: a pattern of dots that simulates tones.

Spot color: a single mixed ink matched to a named color.

Process color: color built from a small set of inks, usually four.

Cliche: the etched plate used in pad printing.

Pad: the silicone stamp that transfers ink in pad printing.

Fixture: a jig that holds a product in position.

Digitizing: converting artwork into a stitch file.

Stitch count: the number of stitches in an embroidery design.

Fill stitch: rows of thread covering an area.

Satin stitch: a dense zigzag for narrow shapes and borders.

Underlay: stabilizing stitches beneath the visible design.

Backing: a stabilizer under fabric during embroidery.

Annealing: heating a metal surface to make a dark mark.

Sublimation: a heat process that turns dye into gas to bond with polymer.

Direct to garment: inkjet printing straight onto textiles.

Pretreatment: a coating applied to a garment before direct printing.

Hand: how a decorated area feels to the fingers.

Deboss: a design pressed into a surface.

Emboss: a design raised above a surface.

Foil stamping: transferring metallic film with heat and a die.

Cure: the heating, drying or light process that sets ink.

Proof: a mockup or sample used for approval before production.

Frequently asked questions

Which imprint method is cheapest for a small order?

Methods with little or no setup usually win on small runs: laser engraving, digital and UV printing, direct to garment and heat transfers. They avoid the screens, plates or stitch files that tooled methods need. Below roughly fifty pieces, setup tends to dominate the total, so the per piece number from a tooled method can mislead. Compare the full job total, setup plus run, at your actual quantity. The crossover point depends on the product, the logo and the supplier, so ask for two quotes with different methods and compare them side by side before you decide.

Can screen printing reproduce a full color photo?

Not well, in most promo work. Screen printing builds an image one ink color at a time, so a photograph needs halftone dots or many screens. Halftones can look good on smooth surfaces with fine mesh, and blotchy on textured fabric or coarse items. For photos and gradients, digital printing, UV printing, sublimation on polyester and direct to garment on cotton are usually better choices because they build color from process inks and do not charge per color. If a client insists on screen printing a photo, ask for a printed sample on the actual product first.

Why does embroidery cost more than a printed logo?

Embroidery is priced mainly by stitch count, and even a modest left chest logo can run several thousand stitches. There is also a one time digitizing fee to convert the artwork into a stitch file. Dense fills raise stitch count and can stiffen the garment, so designs with open space cost less. The reward is a raised, durable mark that survives many washes and reads as upscale, which is why it suits polos, jackets and caps. A one color screen print on the same garment will usually cost less but feels different.

Does laser engraving fade or wear off?

Engraving changes or removes the surface of the material, so it is not a layer that can peel or rub off like ink. On powder coated metal, the beam removes the coating and reveals the bare metal, which is permanent. Contrast depends on the material and the finish: dark coatings show a light mark clearly, while light coatings show less contrast. Laser also cannot produce color, only a single tone set by the material. Ask for a photo of the actual product with an actual mark before you promise a look.

What artwork file should I send for any method?

Send vector artwork, such as a vector PDF, EPS or SVG, with fonts converted to outlines and colors named by target or sample. Vector files scale to any size and convert cleanly into screens, plates, laser paths and stitch files. Low resolution raster images are the most common cause of proof delays, because the supplier has to redraw the logo or ask for something better. If a client only has a raster file, ask for the original source from their designer. Also confirm the imprint area, since a logo that is too wide gets shrunk.

Why was my two color logo quoted as three colors?

Probably an underbase. On black, navy and other dark products, screen printers often print a layer of white ink first so the colors on top stay bright. That white layer is an extra screen and an extra pass, so many shops count it as an additional color. On a white or light product it is not needed. Ask whether the quote includes an underbase and how it is counted, especially for dark garments. A quote that lists a one color print may become two colors once the product color is known.

What is the difference between sublimation and direct to garment?

Sublimation uses heat to turn dye into a gas that bonds with polyester or a polymer coating, so the image becomes part of the material, with no feel at all. It works best on white or light polyester and cannot print white. Direct to garment is an inkjet that sprays water based ink into cotton or cotton blends, with a pretreatment on dark garments. Both give full color without per color setup. Choose by fabric: polyester points to sublimation, cotton points to direct to garment.

Do I need a physical sample before a big order?

For a large or high stakes order, yes, it is cheap insurance. A digital proof confirms size, position and artwork, but it cannot show color, contrast, adhesion or hand. A pre production sample on the real product does. It is especially useful when you have never decorated that plastic, coating or fabric before. For a repeat order of a design that has already run well, a sample may not be needed. A modest sample cost is small beside the cost of rejected goods.

How many imprint locations can I add to a product?

It depends on the product and the method, but every extra location generally carries its own setup and run charge. A sleeve, a back print or the second side of a pen counts as another location. Some products are decorated on multi position equipment, which can make extras cheaper, but do not assume it. Also check that the product has room: seams, handles and curves limit where a mark can sit. Itemize each location on the quote so the client sees what they are paying for.

How can I test whether a decoration will last?

Run simple checks on a pre production sample after the ink has fully cured. Scratch with a fingernail, rub with a dry and a damp cloth, and peel adhesive tape off the mark to test adhesion. For textiles, wash the sample several times and compare it with an unwashed one. For drinkware, run it through the dishwasher or soak and scrub it. Carry pens and tech items in a bag for a few days. These are informal checks, but they catch most weak bonds quickly.

Quote decorated products with a supplier built for resellers

Published tier discounts, blind shipping on request, and applications reviewed within two business days. See what the Trade Print program includes.

Explore the Trade Print program