The quick read
  • Set the frame to trim size plus one eighth of an inch of bleed before placing anything.
  • Extend backgrounds into the bleed. Do not scale the layout to fill it.
  • Keep logos, icons, and type as vector, and check the effective resolution of every photo.
  • Screen color is RGB. Convert on purpose and judge the result on a proof, not a monitor.
  • Put every finish on its own labeled layer and send a short note with the file.

Why the handoff breaks

Screen design tools are built around a simple promise: what you see is what ships. For a website or an app that is nearly true. For print it is not, because print has physical constraints that a screen canvas never has to think about. Paper has edges. Ink has limits. Machines cut, fold, and trim with tolerances measured in fractions of a millimeter.

Figma is a fine tool, and we receive excellent print files from designers who work in it every day. But it was built for interfaces, and its defaults reflect that. There is no native CMYK mode. There are no bleed or slug settings on a frame. Pixels are the base unit. Effects like blur and drop shadow are rendered for screens. None of this is a flaw. It simply means that a print handoff from a screen tool requires a set of deliberate steps that the tool will not prompt you to take.

We see the same few breakages again and again, and they cluster around four areas: size and bleed, color, raster versus vector content, and type. This guide goes through each one, then ends with a checklist and a clean export routine you can copy.

If you only take one idea from this article, take this one. The question to ask before you export is never "does this look right?" It is "does this carry everything a printer needs to make it?" Those are different questions, and the gap between them is where reprints come from.

Set up the file as a print file from the start

The cheapest time to fix a handoff is the first minute of the project. Most of the trouble we see could be avoided by setting up the frame correctly before a single element is placed.

Use real dimensions. Decide the finished trim size first. A standard business card is 3.5 by 2 inches. A letter flyer is 8.5 by 11. A postcard might be 6 by 4. Then add bleed on every side, usually one eighth of an inch, so the frame is larger than the trim. A 3.5 by 2 inch card with bleed becomes 3.75 by 2.25 inches.

Work at a sensible pixel scale. Figma measures in pixels, so you need to pick a conversion. Many designers use 300 pixels per inch directly, meaning a 3.75 inch frame is 1125 pixels wide. Others design at 72 pixels per inch and export at a multiple. Either works as long as everyone on the project agrees and you keep the math written down.

Mark the trim and safe zone. Draw guides or a locked overlay for the trim line and for a safe margin inside it, typically one eighth of an inch inside the trim. Anything important stays inside the safe margin. Anything that touches the edge extends all the way to the bleed boundary.

Start from the printer's template. A template removes guesswork about size, folds, and panels. Our print templates come with correct trim, bleed, and safe zones, so you can import the guides instead of rebuilding them.

Keep the dieline or fold marks on their own layer, clearly named, and make sure they are hidden or excluded on export unless the printer asks for them on a separate page.

Bleed, trim, and safe zones in practice

Bleed is the most common thing we have to ask designers to fix. Here is why it matters. Large sheets are printed, then cut down to the final size. The cutter is accurate but not perfect, and paper shifts a little during printing. If your background color or image stops exactly at the trim line, even a half millimeter of drift leaves a thin white sliver on one edge.

Bleed solves that by extending the artwork past the trim. The cut lands inside the extended area, and the edge looks clean every time.

The common mistakes are predictable.

  • No bleed at all. The file is exactly trim size. We either have to scale it up, which changes the layout, or ask for a new file.
  • Bleed added by scaling. The designer enlarges everything to fill the bigger frame. Now the type is bigger and the margins have moved. The correct move is to extend the background and images only.
  • Empty bleed. The frame is larger, but the background stops at the trim line. The bleed area is white.
  • Important content in the margin. A phone number sits two millimeters from the edge. It survives on a good day and loses its last digit on a bad one.

A quick check is to turn on a trim guide, then drag your background layer and confirm it extends past the guide by the full bleed amount on all four sides. If a design uses a thin border, be careful. A border that sits close to the trim looks uneven when the cut shifts, so either keep borders well inside the safe zone or remove them.

For folded products, add bleed on every panel edge that is cut, and think about how the artwork wraps across the fold. A brochure that folds in thirds has panels that are slightly different widths so the inside panel can tuck. The template handles this. Eyeballing three equal columns does not.

Raster, vector, and the effective resolution trap

A printed file is made of two kinds of content. Vector shapes and live text are defined by math, so they stay sharp at any size. Raster images are grids of pixels, and they have a fixed amount of detail.

In an interface, nearly everything is exported as a raster at one or two scale factors. That habit causes trouble in print when a designer exports a whole layout as a single PNG. Every line of text, every logo, and every icon becomes pixels at whatever resolution you chose. If you chose too low, the edges are soft. If you chose high enough, the file is huge and still lacks the sharpness of true vector.

Where possible, keep the logo, icons, and type as vector, and export to a format that preserves it. Vector PDF is the safest option.

For placed photos and illustrations, resolution is a matter of arithmetic. Divide the image's pixel width by the width in inches that it will occupy in the final piece. That gives effective pixels per inch.

Printed useTarget effective resolutionExample: 4 inch wide image needs
Cards, flyers, brochures300 pixels per inch1200 pixels wide
Posters viewed at arm's length150 to 200600 to 800 pixels wide
Large banners viewed from a distance72 to 100290 to 400 pixels wide
Line art and one color logos600 or more, or vectorVector preferred

This is why a 2000 pixel wide hero image is often too small. Placed across a full 8.5 inch flyer, it comes to about 235 pixels per inch. That passes for casual viewing and looks mediocre on a glossy sheet. Stretched across a 24 inch poster, it falls to 83 pixels per inch, which is visibly soft up close.

One more trap deserves a mention. Changing the pixel dimensions to hit a number does not add detail. Resampling a small image up to 300 pixels per inch gives you a bigger file with the same amount of real information. Fix the source instead.

Color: the silent change

Screen design tools work in RGB. A design file may look bright and punchy because the monitor is emitting light. Paper reflects it. The difference is physical, and it shows up as a shift when the file converts to CMYK for the press.

Bright blues, greens, oranges, and pinks fall outside what four ink colors can reproduce. After conversion they land at the nearest printable value, which is usually duller. Deep, rich blacks behave differently too. A pure RGB black converts to a mix that can look thin or muddy depending on the settings.

There are three ways to handle this, in order of how much control you have.

  1. Do the final conversion in a print application. Export a vector PDF from your design tool, open it in software that supports CMYK and profiles, convert deliberately, and check the result before sending. This gives the most control.
  2. Choose print-safe colors early. Pick brand colors with known CMYK or Pantone equivalents, and enter their values. Do not rely on a screen color picker.
  3. Let the printer convert, with eyes open. Many printers accept RGB and convert it. This works for photographs. It is risky for brand colors, where a shift is noticeable.

For logos with an exact brand color, ask for a spot color or a specific CMYK recipe from the brand guidelines. Our primer on CMYK, RGB, and spot color explains how those differ and when each is the right call.

Whatever you do, do not judge final color by looking at a screen. Request a proof.

Type, fonts, and outlines

Fonts are another quiet source of trouble. If a PDF does not embed the font, the printer's system substitutes another one. Line breaks change, text overflows its box, and a tidy headline turns into a messy one.

The usual remedies are to embed fonts on export, or to convert text to outlines. Embedding keeps text live and selectable. Outlining turns letters into shapes, which guarantees the shape but removes the ability to edit.

Be aware of licensing here. Some font licenses limit embedding or require a separate print license. Check yours before delivering a file you cannot take back.

A few more type issues come up often.

  • Tiny reversed text. White type on a dark background fills in at small sizes because ink spreads slightly. Below about seven points, thin strokes can vanish. Use a heavier weight or a bigger size.
  • Hairlines. Strokes thinner than a quarter point may not print reliably. Make them at least half a point for most processes.
  • Fake bold and italic. Faux styles applied by software look wrong in print. Use the real weight from the font family.
  • Auto layout surprises. Components that resize based on content can shift text unexpectedly between design and export. Freeze the final layout before you export.

Our guide to brand guidelines covers how to specify type so a team can reproduce it consistently across screen and print.

Effects, transparency, and special finishes

Soft shadows, glows, blurs, and blend modes are common in screen design and delicate in print. Shadows made with large blur radii can band, showing visible steps instead of a smooth gradient, particularly on uncoated paper. Heavy transparency on top of photos can flatten unpredictably when the file is prepared for press.

If a design relies on these effects, test them. Export a small section as a vector PDF, ask for a proof, and look at it in daylight. In many cases, converting a complex effect to a high resolution image of that area gives more reliable results than leaving it live.

Finishes need more than good artwork. Foil, spot UV, embossing, and varnish all depend on separate layers that tell the press exactly where the effect goes. These layers are usually single color shapes assigned a named spot color, and printers have specific naming conventions. Draw them as vector shapes aligned to the artwork, put each finish on its own layer or page, and label it plainly.

We walk through what each finish needs in our guide to premium finishes. Treat it as required reading before you design a foil job, because the way you build the mask changes the quote and the result.

A clean export routine

Here is the sequence we suggest for sending a file from a screen design tool to a printer. It takes about fifteen minutes the first time and less after.

  1. Freeze the layout. Resolve any auto layout, detach unnecessary component links, and remove hidden layers.
  2. Confirm the frame size. Trim plus bleed on all sides, with trim and safe guides visible for checking.
  3. Check every placed image. Compute effective resolution and replace anything below target.
  4. Extend backgrounds into the bleed. Do not scale content to fill.
  5. Set fonts. Make sure they will embed, or outline them where licensing allows.
  6. Export vector PDF. Keep logos, shapes, and type as vector.
  7. Open the PDF and inspect it. Zoom to one hundred percent on edges, small type, and any photos. Read every word.
  8. Convert color and soft proof. Use the printer's profile and note any shifts.
  9. Name the file clearly. Client, product, version, and size.
  10. Upload and review the proof. Never approve a job without looking at one.

Our upload page runs an automatic check for size, bleed, and resolution as soon as a file arrives, so many of these problems are caught before a person ever opens the job.

What to tell the printer

The file is only half of a handoff. The other half is information. A short note with the file prevents most of the questions that slow a job down.

Include the finished size, quantity, paper stock, and any finishes. Say whether the colors are final. Point out anything unusual, such as a deliberate full-bleed dark solid, a foil element, or a fold that wraps. If you are matching a brand color, include the exact specification, and tell the printer whether you need a close match or a precise one.

Ask about their file requirements before you start. Every shop has a preferred format, profile, and bleed amount, and following them from the beginning is cheaper than adapting later. If you are a reseller or agency sending jobs for clients, a trade account gives you a consistent spec sheet and a single point of contact. Take a look at Inkgility Trade Print for how that works in practice.

Finally, ask for a digital proof on anything that matters. A proof is the cheapest insurance in the process. The proofer demo shows what reviewing one looks like, including how to mark corrections and approve the final version.

A handoff checklist you can copy

  • Trim size is correct and written in the file name.
  • Bleed of one eighth of an inch exists on all cut edges.
  • Backgrounds and images extend into the bleed.
  • Important text and logos sit inside the safe margin.
  • Placed images meet the target resolution at final size.
  • Logos and icons are vector.
  • Fonts are embedded or outlined, with licensing confirmed.
  • Color has been converted and checked against a proof.
  • Finishes are on separate, labeled layers.
  • Dielines and notes are excluded from the print layer.
  • Every word, number, and URL has been proofread.

Print this list and keep it near your desk. Designers who run it every time rarely see a file come back.

Frequently asked

How much bleed should I add?

One eighth of an inch (0.125 in, about 3 mm) on every cut edge is the common standard. Always confirm with your printer, since some products such as large format or packaging use a different amount.

Can I send an RGB file to the printer?

Many printers accept it and convert it for you, which works acceptably for photographs. It is riskier for brand colors, because the automatic conversion can shift them. Converting yourself and checking a proof gives you control.

What export format is best for print?

A vector PDF with fonts embedded or outlined, bleed included, and the printer profile applied is the safest choice. Avoid flattening an entire layout into one image, which turns text and logos into pixels.

Why is my 2000 pixel image too small?

Effective resolution depends on printed size. Across 8.5 inches, 2000 pixels gives about 235 pixels per inch, which is acceptable but not ideal. Across a 24 inch poster it falls to about 83, which looks soft up close.

What should I tell the printer along with the file?

Give the finished size, quantity, stock, finishes, and whether colors are final. Flag anything unusual such as full bleed dark solids, foil, or wrapping folds, and include exact specifications for brand colors.

Hand off with a proof, not a hope

Trade Print accounts include automatic file checks and digital proofs, so problems surface before the press starts.

Explore Trade Print